Brian Massey is the Conversion Scientist at Conversion Sciences and he has the lab coat to prove it. His rare combination of interests, experience and neuroses was developed over almost 20 years as a computer programmer, entrepreneur, corporate marketer, national speaker and writer.
http://www.lukelaughs.com Tyson, my nearly two year old son, has developed a keen love of balls and cricket in particular. He will turn anything into a bat…a broom handle, comb, coat hanger, or a very small stick.
Kody's first attempt to jump off of the quarter pipe.
Setting: Brighton, UT.
Date: April 3, 2011
Characters: Brig Lowell (orange pants), Jetsen Lowell (green coat), Brandon Newton (black coat skier), and Kody Newton (with Gopro)
Rating: Awesome.
Kody's first attempt to jump off of the quarter pipe.
Setting: Brighton, UT.
Date: April 3, 2011
Characters: Brig Lowell (orange pants), Jetsen Lowell (green coat), Brandon Newton (black coat skier), and Kody Newton (with Gopro)
Rating: Awesome.
The Woofer featured on Philadelphia's Channel 10 NBC News. The host of Dawn's Pet Project, Dawn Timmeney, stopped by to do a piece on The Woofer and took it out for a spin with her Yellow Labrador, Bhodi, down historical South Street. Watch as the two turn heads with The Woofer, a coat for dogs made with speakers built in, that lets you play your music! Each coat is designed and hand-made by local inventor Matthew Baron. www.TheWoofer.com "We make dog clothes that Rock!"
The Four-Minute Southern Cook shows you how to make delicious, tender and juicy pan-fried port chops in just minutes with House-Autry Pork Breader. Your family will love this traditional Southern dish, and you’ll love the ease and convenience of preparing it. This video will show you how you can put a great meal on the table in just a few minutes! See more delicious recipes at www.house-autry.com. Servings: 4 Approx. Prep Time: 5-7 min. Approx. Cook Time: 5-8 min. Ingredients: 4-5 fresh bone-in pork chops 1 box House-Autry Pork Breader 1 medium bowl of water Corn oil for frying Directions: Heat oil in heavy cast iron skillet to 375°F. Make sure oil fills up no more than a quarter of your skillet. You want the oil to only cover about half of your pork chops, so if you’re using a 2-inch deep skillet, you’d need about 1/4 inch of oil in the bottom. To check temperature, sprinkle a little breader mix in hot oil. If it bubbles up golden brown, you’re ready to cook. Take some of the Pork Breader and pour it onto a large plate. Take each chop, dip it in the water, shake off excess, and roll it in the breader on the plate, covering each side thoroughly. You can also put the chops in a large re-sealable bag with the breader and shake to coat. Place coated chops in the heated oil carefully - leaving plenty of room around them for the oil to flow. Fry for 5-8 minutes until golden brown. Use wire racks and paper towels to drain excess oil. Meal Suggestions: Serve with mashed potatoes and gravy, fresh garden vegetables or favorite casserole for a great family meal.
The Four Minute Southern Cook shows you how to prepare delicious, flaky, moist Southern fried catfish fillets quickly with House-Autry Fish Fry. See more delicious recipes at www.house-autry.com. Approx. Prep Time: 5 min. Approx. Cook Time: 3-5 min. Ingredients: 4 fresh catfish fillets 1 package House-Autry Fish Fry Water in bowl Oil for frying Directions: In a cast iron skillet or electric frying pan, preheat oil to 375°F. Test with thermometer or by sprinkling a little breader mix in oil - if it bubbles up golden brown, oil is ready. Dip catfish fillets in water, shake off excess, and either roll in Fish Fry mix on plate or shake in large re-sealable plastic bag to thoroughly coat fillets. When oil is proper temperature, gently place catfish fillets into the skillet, leaving room around each piece for oil to flow. Fry fish for 2-3 minutes and check for golden brown color. Drain on wire racks with paper towels. Meal Suggestions: Serve with fresh, hot corn on the cob, potato salad or coleslaw and House-Autry hushpuppies with tartar sauce on the side.
Oslo is the capital and largest city in Norway.Oslo is the cultural, scientific, economic and governmental centre of Norway. The city is also a hub of Norwegian trade, banking, industry and shipping. It is also an important centre for maritime industries and maritime trade in Europe.Oslo is one of very few cities in Norway, besides Bergen and Tønsberg, that does not have a formal coat-of-arms, but uses a city seal instead. Oslo is the capital of Norway, and as such is the seat of Norway's national government.Oslo is basically built in a horseshoe shape on the shores of the Oslo-fjord and limited in most directions by hills and forests. This means that any point within the city is relatively close to the forest.Oslo has a large number of parks and green areas within the city core, as well as outside it.Frogner Park is a large park located a few minutes walk away from the city center. For more information visit us-: http://www.norwaytv.com/
Oslo is the capital and largest city in Norway.Oslo is the cultural, scientific, economic and governmental centre of Norway. The city is also a hub of Norwegian trade, banking, industry and shipping. It is also an important centre for maritime industries and maritime trade in Europe.Oslo is one of very few cities in Norway, besides Bergen and Tønsberg, that does not have a formal coat-of-arms, but uses a city seal instead. Oslo is the capital of Norway, and as such is the seat of Norway's national government.Oslo is basically built in a horseshoe shape on the shores of the Oslo-fjord and limited in most directions by hills and forests. This means that any point within the city is relatively close to the forest.Oslo has a large number of parks and green areas within the city core, as well as outside it.Frogner Park is a large park located a few minutes walk away from the city center. For more information visit us-: http://www.norwaytv.com/
The Four-Minute Southern Cook shows you how to make the kids and the adults happy with quick, easy, delicious House-Autry Southern fried chicken tenders or nuggets. It's a snap with House-Autry Chicken Breader! This video will show you how you can put a great meal on the table in just a few minutes! See more delicious recipes at www.house-autry.com. Servings: 4 Approx. Prep Time: 5 min. Approx. Cook Time: 7 min. Ingredients: 1/2 cup Chicken Breader 1 pound boneless, skinless chicken breasts Oil for frying Directions: Cut chicken breasts into 1-1 1/2-inch cubes; rinse in water, shaking off excess. Place chicken and House-Autry Chicken Breader into a resealable plastic bag. Seal and shake to coat chicken. Remove from bag and place chicken in a skillet with 1/4-inch oil heated to medium high. Cook approximately 4 minutes, turn and cook approximately 3 minutes longer, or until both sides are nicely browned. Remove from skillet and drain on paper towels. For Chicken Tenders: cut breasts lengthwise into 6 strips; then follow directions above. For Deep Fried Chicken Tenders or Chicken Nuggets, cook 4 minutes at 365°F. Meal Suggestions: Who doesn't love a great chicken sandwich? Just add bread. Or, kick it up with some zesty BBQ sauce, cheddar cheese and pickles.
The Four Minute Southern Cook shows you how to bring the taste of the coast right to your dinner table with a family favorite: House-Autry Southern fried flounder. Perfect for supper or a family picnic, and a breeze to make with House-Autry Seafood Breader. See more delicious recipes at www.house-autry.com. Approx. Prep Time: 15 min. Approx. Cook Time: 15 min. Ingredients: 2 pounds Seafood Breader 20 pounds fish fillets or 10 pounds shrimp 4 cups water or milk oil for frying Directions: Preheat oil to 375°F. Moisten seafood with water or milk. Shake off excess moisture. Coat seafood, by shaking seafood in plastic bag, or roll seafood on plate with House-Autry Seafood Breader. Deep fry fish fillets 2-3 minutes or until golden brown. Deep fry shrimp 1 minute or until golden brown. Meal Suggestions: Try these Southern Classics: Shrimp Burgers, Oyster Burgers, Clam Burgers, or Scallop Burgers: Fry seafood according to directions. Put 4 ounces of your chosen seafood a soft hamburger bun with slaw, a tbsp of tartar sauce on one bun and a tbsp of ketchup on the other. Tastes like a day at the beach!
The Four Minute Southern Cook shows you how to please a crowd quickly and easily with zesty fried chicken wings and drummettes made with House-Autry Medium Hot Breader. See more delicious recipes at www.house-autry.com.
Approx. Prep Time: 10 min.
Approx. Cook Time: 10 min.
Ingredients:
5 pounds of chicken wings and/or drummettes
2 cups water
1 package of House-Autry Medium Hot Breader mix
Oil for frying
Directions:
In a cast iron skillet or electric frying pan, preheat oil to 375°F. Test with thermometer or by sprinkling a little breader mix in oil - if it bubbles up golden brown, oil is ready.
Measure out 2 tablespoons of Medium Hot Breader mix and set aside in small bowl. Moisten wings and/or drummettes in water and shake off excess. Coat chicken in breader mix until all pieces are coated.
When oil is proper temperature, gently place wings/drummettes into the skillet, leaving room around each piece for oil to flow. Fry chicken for 8-10 minutes or until golden brown. Drain on wire racks with paper towels.
Meal Suggestions:
Make your own Buffalo-style sauce for dipping. Serve with celery and carrot sticks, blue cheese or ranch dressing. Reheats easily - wrap in foil and heat in 350° F oven or on grill for 10-12 minutes.
http://www.petermulder.org When we go to the city for the day or a weekend, we make sure that we are well prepared for the trip. We take a coat, our wallet, perhaps a camera and an umbrella, just in case. We also make sure the car is ready.
This video demonstrates the plugin in action. I'll do some painting on a mesh in 3D-Coat and send it to Messiah, and back again to update the textures and I also discuss the fine points of the plugin. What's more, I'll also show you how to send a mesh from Messiah to be used as a brush alpha, for voxels and more.
This video demonstrates the plugin in action. I'll do some painting on a mesh in 3D-Coat and send it to Messiah, and back again to update the textures and I also discuss the fine points of the plugin.
This video demonstrates the plugin in action. I'll do some painting on a mesh in 3D-Coat and send it to Messiah, and back again to update the textures and I also discuss the fine points of the plugin.
Please Visit
http://michellescountrycorner.blogspot.com/
In this Episode of Country Corner we makeover a kitchen island with a fresh coat of paint.
Thanks for watching. Feel free to leave any comments, questions, or ideas.
Check out our Facebook Page:)
http://www.facebook.com/pages/Country-Corner/123025284380957 Distributed by Tubemogul.
EvanLong.net - EvanLong.tk - TheColumbineCause.tk On 3 November 2010, I appeared on âÂÂGhosts of the Republicâ to discuss âÂÂThe Columbine Cause.â The program went well, especially for having three co-hosts, and would be a decent starting place for someone trying to get a handle on the Columbine shooting. 60 minutes. Tags: columbine shooting, columbine high school, eric harris, dylan klebold, chris morris, robert perry, brian sargent, conspiracy, false flag terrorism, psyop, patsy, coverup, nwo, new world order, fascism, fbi, military, evan long, politics, starviego, echoes of columbine, crtf, interview, corporatism, antidepressant, big pharma, ssri, inside job, 9/11, diaries, luvox, bullying, trench coat mafia, dave cullen, columbine
The Woofer went to the Harrisburg Woofstock with a pit bull. This event draws hundreds of dogs and people to Harrisburg, PA. The Woofer is a coat for dogs with speakers and amplifier built in. This is one of my favorite songs, Concrete Schoolyard by Jurassic 5. A pug comes in to play with my pitbull.
The Woofer is introduced on the Breezin With Bierman television show. There is an interview with Matthew Baron the inventor of The Woofer. The Woofer is a dog coat that plays music from an Ipod. This interview aired on Princeton, New Jersey public access station.
The Woofer went to the Harrisburg Woofstock with a pit bull. This event draws hundreds of dogs and people to Harrisburg, PA. The Woofer is a coat for dogs with speakers and amplifier built in. We turned this adorable dog into a boom box. Oh baby!
The Woofer is a dog coat that lets you play songs from your Ipod or other MP3 players on their back. Each Woofer is hand-made in Philadelphia, Pennsylvania. Share your music with friends and dogs while walking, running, or in a dog park.
When it comes to hardwood floor refinishing in Minneapolis, MN, the hassle, disorder, and heinous odor have been a barrier to local area house owners. Now there is an cost-effective and eco-friendly solution to revitalizing your home. A one-of-a-kind technique now is available that brings back floor splendor without worries about sanding away too much of the woodâÂÂs top-layer. You can also postpone total sanding and refinishing for years while maintaining the gorgeous shine that makes hardwood floors so appealing. The procedure is also a very cost-effective way compared to entirely refinishing to get your floors looking like brand new. You can leave for work in the a.m. and come back to finished floors that evening â without noxious smells and unsightly equipment.
The Woofer is a dog coat that lets you play songs from your Ipod or other MP3 players on their back. Each Woofer is hand-made in Philadelphia, Pennsylvania. Take out your ear buds and bring your music to the streets.
http://www.TheWoofer.com The Woofer is a dog coat that lets you play songs from your Ipod or other MP3 players on their back. We turn dogs into boom boxes. Each Woofer is hand-made in Philadelphia and is made for dogs from 20 to 100 pounds.
http://www.TheWoofer.com The Woofer is a dog coat that lets you play songs from your Ipod or other MP3 players on their back. We turn dogs into boom boxes. Each Woofer is hand-made in Philadelphia and is made for dogs from 20 to 100 pounds.
http://eaglecoatings.net HOT PIPE COATING î is a unique combination of high performance specially designed high-temperature resins in a waterborne formula. This coating will dry slowly by evaporation and can be aided in the dry down by adding high heat to the environment. HOT PIPE COATING î was engineered to be applied over hot pipes or other high temperature surfaces to achieve immediate adhesion while lowering the temperature of the hot surface. Using this coating as the primer and base build coat, we can achieve adhesion over the hot surface and create a surface that is insulated to stop heat flow. It is waterborne to offer a nonflammable, non toxic formula for high heat situations.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the 2D Paint tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Airbrush tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers all of the command tools.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Axial Symmetry tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Carve tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Clay tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Copy tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Curves tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Cut & Clone tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Fill tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Cell Hide tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Increase tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Merge tool.
For the launch of 3D-Coat v3 I was tasked with recording a video manual covering all of the voxel sculpting tools and general settings for voxel sculpting.
This video covers the Move tool.